No products in the cart.
Quick Attach Mega Mower X Brush Cutter (Standard & High Flow)
If you’re clearing thick brush, saplings, or full overgrowth, the Mega Mower X is built to do what most “brush cutters” can’t—cut, mulch, and grind in one pass.
This isn’t a light-duty mower. It’s an industrial open-front cutter designed to push into material, take it down fast, and leave behind a cleaner finish without needing a second pass.
Whether you’re running standard flow or high flow, this attachment is built around one goal:
Get more done per hour with less wear on your machine and crew
Built for Serious Clearing
The Mega Mower X uses a direct-drive hydraulic motor and heavy flywheel system to deliver consistent torque and cutting energy. Combined with its open-front design and push bar, you can drive straight into thick brush and small trees instead of backing into everything.
The result? Faster clearing, better productivity, and less operator fatigue.
Key Features (Both Models)
- Open Front Design + Push Bar
Push over and cut standing material without repositioning - 4 Heavy-Duty AR400 Steel Blades
Built for aggressive cutting and long life in harsh conditions - 12 Carbide-Tipped Mulching Teeth
Break down debris and grind stumps while you cut - Serrated Side Plates
Limb branches as you go—no extra tools needed - 3/4” Reinforced Flywheel + Forged Shaft
Handles extreme impact loads without failure - Heavy-Duty Deck Construction (Grade 50 Steel)
Built for contractors running these daily—not occasional use
Standard Flow vs High Flow (THIS is your money section)
PRODUCT COMPARISON TABLE
| Feature | Standard Flow Mega Mower X | High Flow Mega Mower X |
|---|---|---|
| Hydraulic Requirement | 15–25 GPM | 25–41 GPM |
| Machine Type | Mid-size skid steers | High-flow skid steers / track loaders |
| Cutting Power | Strong | Maximum output / commercial clearing |
| Blade Tip Speed | Lower | Significantly higher (up to ~19,000 ft/min) |
| Cutting Energy | Moderate | Up to 126,000+ ft/lbs |
| Ideal Use | Grass, brush, light trees | Dense brush, heavy saplings, aggressive clearing |
| Productivity | Good | Faster clearing per hour |
| Operating Weight | ~1,200–1,470 lbs | ~1,380–1,520 lbs |
| Case Drain Required | Typically no | Yes (most setups) |
| Cost | Lower entry | Higher—but higher ROI |
72” vs 78” (Variant Breakdown)
| Feature | 72” Model | 78” Model |
|---|---|---|
| Cutting Width | 72” | 78” |
| Best Fit | Standard jobsites, tighter areas | Larger jobs, open land |
| Weight | Slightly lighter | Heavier / more stability |
| Blade Length | Shorter | Longer (more reach per rotation) |
| Productivity | High | Maximum coverage per pass |
Orders after 11am Ship Next Day
Free Shipping on Orders over $5,000
The Majority of items that fit on 1 pallet are flat rate shipping for 150$. If you are shipping multiple items Please call the office as sometimes these can be combined, saving you shipping cost.
Some Oversized Items (96" or above) can be shipped but will need to be quoted. Please call the office if your item is "Oversized" at (615) 454-7544
Free Shipping on Orders over $5,000
The Majority of items that fit on 1 pallet are flat rate shipping for 150$. If you are shipping multiple items Please call the office as sometimes these can be combined, saving you shipping cost.
Some Oversized Items (96" or above) can be shipped but will need to be quoted. Please call the office if your item is "Oversized" at (615) 454-7544
Quick Attach Mega Mower X
Price range: $10,645.00 through $13,495.00
Quick Attach Mega Mower X Brush Cutter (Standard & High Flow)
If you’re clearing thick brush, saplings, or full overgrowth, the Mega Mower X is built to do what most “brush cutters” can’t—cut, mulch, and grind in one pass.
This isn’t a light-duty mower. It’s an industrial open-front cutter designed to push into material, take it down fast, and leave behind a cleaner finish without needing a second pass.
Whether you’re running standard flow or high flow, this attachment is built around one goal:
Get more done per hour with less wear on your machine and crew
Built for Serious Clearing
The Mega Mower X uses a direct-drive hydraulic motor and heavy flywheel system to deliver consistent torque and cutting energy. Combined with its open-front design and push bar, you can drive straight into thick brush and small trees instead of backing into everything.
The result? Faster clearing, better productivity, and less operator fatigue.
Key Features (Both Models)
- Open Front Design + Push Bar
Push over and cut standing material without repositioning - 4 Heavy-Duty AR400 Steel Blades
Built for aggressive cutting and long life in harsh conditions - 12 Carbide-Tipped Mulching Teeth
Break down debris and grind stumps while you cut - Serrated Side Plates
Limb branches as you go—no extra tools needed - 3/4” Reinforced Flywheel + Forged Shaft
Handles extreme impact loads without failure - Heavy-Duty Deck Construction (Grade 50 Steel)
Built for contractors running these daily—not occasional use
Standard Flow vs High Flow (THIS is your money section)
PRODUCT COMPARISON TABLE
| Feature | Standard Flow Mega Mower X | High Flow Mega Mower X |
|---|---|---|
| Hydraulic Requirement | 15–25 GPM | 25–41 GPM |
| Machine Type | Mid-size skid steers | High-flow skid steers / track loaders |
| Cutting Power | Strong | Maximum output / commercial clearing |
| Blade Tip Speed | Lower | Significantly higher (up to ~19,000 ft/min) |
| Cutting Energy | Moderate | Up to 126,000+ ft/lbs |
| Ideal Use | Grass, brush, light trees | Dense brush, heavy saplings, aggressive clearing |
| Productivity | Good | Faster clearing per hour |
| Operating Weight | ~1,200–1,470 lbs | ~1,380–1,520 lbs |
| Case Drain Required | Typically no | Yes (most setups) |
| Cost | Lower entry | Higher—but higher ROI |
72” vs 78” (Variant Breakdown)
| Feature | 72” Model | 78” Model |
|---|---|---|
| Cutting Width | 72” | 78” |
| Best Fit | Standard jobsites, tighter areas | Larger jobs, open land |
| Weight | Slightly lighter | Heavier / more stability |
| Blade Length | Shorter | Longer (more reach per rotation) |
| Productivity | High | Maximum coverage per pass |
Orders after 11am Ship Next Day
Free Shipping on Orders over $5,000
The Majority of items that fit on 1 pallet are flat rate shipping for 150$. If you are shipping multiple items Please call the office as sometimes these can be combined, saving you shipping cost.
Some Oversized Items (96" or above) can be shipped but will need to be quoted. Please call the office if your item is "Oversized" at (615) 454-7544
Free Shipping on Orders over $5,000
The Majority of items that fit on 1 pallet are flat rate shipping for 150$. If you are shipping multiple items Please call the office as sometimes these can be combined, saving you shipping cost.
Some Oversized Items (96" or above) can be shipped but will need to be quoted. Please call the office if your item is "Oversized" at (615) 454-7544
In stock
Additional information
| Size | 72", 78" |
|---|---|
| Flow Rate | Standard Flow, High Flow |
- Free shipping on all orders above 5,000
- Orders after 11am ship next day
- Typical Delivery is 2-3 days
- Typical Shipments are around $170
Got Questions?
Feel free to Get in touch
From small jobs to big business — get the equipment you need now with 0% financing for 12 months through Synchrony Financing.
Click below to start your application. Once approved, give us a ring!
Skid Steer Machine Specs & Compatibility Tool
Start by selecting your skid steer’s brand, model, and flow type. We’ll display the exact machine specifications you need to compare attachments and select the best match with confidence.
Select a brand, model, and flow type to see machine specs.
This compatibility tool is intended as a guide only. Machine specifications can vary by model year and configuration. Always confirm compatibility with your equipment manufacturer. TN Skid Steer Supply assumes no responsibility for improper fitment or use.
Related products
Quick Attach Mega Mower X Price range: $10,645.00 through $13,495.00