BM Revolution 64″ Skid Steer Cutter – Mulcher / Rotary Cutter Hybrid

The BM Revolution 64″ Cutter combines the cutting power of a heavy-duty rotary cutter with forestry-style mulching capability in a more compact, maneuverable package. Built for serious land clearing, the Revolution uses a high-efficiency bent-axis piston motor, four heavy-duty cutting blades, and sixteen concave mulching teeth to attack thick brush, saplings, and trees up to 8 inches.

Available in both standard-flow and high-flow configurations, the Revolution is designed to make maximum use of your skid steer’s hydraulic power. Its open-front deck, reinforced blade holder, and oversized bearing assembly make it a serious option for operators who need more capability than a traditional brush cutter.

Hydraulic Options

• Standard Flow: 15–35 GPM
• High Flow: 36–45 GPM
• Rated up to 5,700 PSI
• Case drain required

Cutting Capacity & Dimensions

• 64″ deck width
• Rated for trees up to 8″
• Approximately 1,450 lbs.
• Cuts stumps down even with ground level

High-Efficiency Piston Motor

The Revolution is powered by a bent-axis piston motor designed to maintain power under demanding cutting conditions.

• Up to 98% efficiency
• Rated up to 5,700 PSI
• Up to 1,300 RPM at maximum GPM
• Designed to withstand contamination up to approximately 40 microns

This highly efficient hydraulic system allows even the standard-flow configuration to deliver impressive cutting performance.

Heavy-Duty Blade System

The 64″ Revolution uses a reinforced dual-plate blade holder with four large cutting blades and forestry-style mulching teeth.

• Four 5160 steel blades
• Approximately 1/2″ thick
• Approximately 12″ long
• Approximately 5″ wide
• Sixteen 1-1/8″ concave mulching teeth
• Two 1/2″ plates welded together in a reinforced layered design
• 100 KSI blade holder
• Nearly 3X stronger than standard steel
• Easy blade replacement with access through the top of the deck

The combination of conventional cutting blades and concave mulching teeth helps the Revolution cut and process material more aggressively than a traditional rotary cutter.

Heavy-Duty Bearing Housing

The oversized bearing assembly is engineered to withstand the side loads and impact forces generated during heavy land-clearing work.

• 3.625″ shaft diameter
• 30,000 PSI column-pressure rated
• 43,000 PSI side-load pressure rated
• Large oil capacity helps control heat
• Locking pin helps secure the shaft in the event of bearing failure

Forestry-Inspired Deck Design

The Revolution’s compact open-front deck provides easier access to trees and heavy brush while improving maneuverability in tighter areas.

• Cuts stumps even with ground level
• Open-front push-bar design
• Easier access to larger trees
• Cleaner finish on grass and smaller vegetation
• Pointed deck corners for selective cutting
• Sloped side push bar for cutting closer to leaning trees, guy wires, and obstacles
• Low-angle quick attach
• Allows approximately 85% roll-up for reaching overhanging limbs
• Compact footprint for increased maneuverability

Built for Serious Clearing

The BM Revolution 64″ Cutter is built for:

• Heavy brush clearing
• Tree and sapling removal
• Land reclamation
• Hunting property maintenance
• Fence-line clearing
• Right-of-way maintenance
• Forestry cleanup
• Overgrown property maintenance

For operators who want the aggressive performance of a mulching cutter without the size of a full forestry mulcher, the BM Revolution 64″ delivers serious cutting power in a compact 64-inch package.

Made in America!
1 year manufacturers warranty!