No products in the cart.
This 32″ Skid Steer Stump Grinder is built to deliver strong cutting performance without excessive bogging or hydraulic strain. It is available in two hydraulic configurations so you can match the grinder to your skid steer’s flow requirements.
Available Configurations:
Low Flow — 15–34 GPM
Standard price
High Flow — 35–45 GPM
+$1,000
The grinder uses a high-efficiency bent-axis piston motor designed to maintain power under demanding stump-grinding loads. Combined with aggressive 900 Series GreenTeeth, a direct-drive system, and a heavy-duty bearing housing, it is built for serious commercial use.
Key Features
- 32″ grinding wheel
- Low Flow: 15–34 GPM
- High Flow: 35–45 GPM
- High Flow upgrade: +$1,000
- Bent-axis piston motor
- Up to 97% motor efficiency
- Up to 1300 RPM
- Rated up to 6,000 PSI
- Direct-drive design
- Heavy-duty bearing housing
- 3.625″ bolt-on carrier plate shaft diameter
- 30,000 PSI column pressure rating
- 43,000 PSI side-load pressure rating
- 1″ plate replaceable tooth holders
- 900 Series GreenTeeth
- 3 usable cutting sides per tooth
- Heavy-duty 1/2″ deck
- Large steel deflection door
- Built-in step
- Approximately 700 lbs.
- Approximately 12″ below-ground cutting capability
- Case drain required
Choosing Your Flow Option
Choose Low Flow (15–34 GPM) for machines operating within the standard-flow range.
Choose High Flow (35–45 GPM) for high-flow skid steers. The High Flow configuration is a $1,000 upgrade over the Low Flow model.
Always verify your machine’s auxiliary hydraulic flow before ordering.
American Made
1 year manufacturers warranty!
Orders after 11am Ship Next Day
Free Shipping on Orders over $5,000
The Majority of items that fit on 1 pallet are flat rate shipping for 150$. If you are shipping multiple items Please call the office as sometimes these can be combined, saving you shipping cost.
Some Oversized Items (96" or above) can be shipped but will need to be quoted. Please call the office if your item is "Oversized" at (615) 454-7544
Free Shipping on Orders over $5,000
The Majority of items that fit on 1 pallet are flat rate shipping for 150$. If you are shipping multiple items Please call the office as sometimes these can be combined, saving you shipping cost.
Some Oversized Items (96" or above) can be shipped but will need to be quoted. Please call the office if your item is "Oversized" at (615) 454-7544
BrushMonster Stump Grinder
Price range: $13,200.00 through $14,200.00
This 32″ Skid Steer Stump Grinder is built to deliver strong cutting performance without excessive bogging or hydraulic strain. It is available in two hydraulic configurations so you can match the grinder to your skid steer’s flow requirements.
Available Configurations:
Low Flow — 15–34 GPM
Standard price
High Flow — 35–45 GPM
+$1,000
The grinder uses a high-efficiency bent-axis piston motor designed to maintain power under demanding stump-grinding loads. Combined with aggressive 900 Series GreenTeeth, a direct-drive system, and a heavy-duty bearing housing, it is built for serious commercial use.
Key Features
- 32″ grinding wheel
- Low Flow: 15–34 GPM
- High Flow: 35–45 GPM
- High Flow upgrade: +$1,000
- Bent-axis piston motor
- Up to 97% motor efficiency
- Up to 1300 RPM
- Rated up to 6,000 PSI
- Direct-drive design
- Heavy-duty bearing housing
- 3.625″ bolt-on carrier plate shaft diameter
- 30,000 PSI column pressure rating
- 43,000 PSI side-load pressure rating
- 1″ plate replaceable tooth holders
- 900 Series GreenTeeth
- 3 usable cutting sides per tooth
- Heavy-duty 1/2″ deck
- Large steel deflection door
- Built-in step
- Approximately 700 lbs.
- Approximately 12″ below-ground cutting capability
- Case drain required
Choosing Your Flow Option
Choose Low Flow (15–34 GPM) for machines operating within the standard-flow range.
Choose High Flow (35–45 GPM) for high-flow skid steers. The High Flow configuration is a $1,000 upgrade over the Low Flow model.
Always verify your machine’s auxiliary hydraulic flow before ordering.
American Made
1 year manufacturers warranty!
Orders after 11am Ship Next Day
Free Shipping on Orders over $5,000
The Majority of items that fit on 1 pallet are flat rate shipping for 150$. If you are shipping multiple items Please call the office as sometimes these can be combined, saving you shipping cost.
Some Oversized Items (96" or above) can be shipped but will need to be quoted. Please call the office if your item is "Oversized" at (615) 454-7544
Free Shipping on Orders over $5,000
The Majority of items that fit on 1 pallet are flat rate shipping for 150$. If you are shipping multiple items Please call the office as sometimes these can be combined, saving you shipping cost.
Some Oversized Items (96" or above) can be shipped but will need to be quoted. Please call the office if your item is "Oversized" at (615) 454-7544
In stock
Additional information
| Flow Type | 15-34 Low Flow, 34-45 High Flow |
|---|
- Free shipping on all orders above 5,000
- Orders after 11am ship next day
- Typical Delivery is 2-3 days
- Typical Shipments are around $170
Got Questions?
Feel free to Get in touch
From small jobs to big business — get the equipment you need now with 0% financing for 12 months through Synchrony Financing.
Click below to start your application. Once approved, give us a ring!
Skid Steer Machine Specs & Compatibility Tool
Start by selecting your skid steer’s brand, model, and flow type. We’ll display the exact machine specifications you need to compare attachments and select the best match with confidence.
Select a brand, model, and flow type to see machine specs.
This compatibility tool is intended as a guide only. Machine specifications can vary by model year and configuration. Always confirm compatibility with your equipment manufacturer. TN Skid Steer Supply assumes no responsibility for improper fitment or use.
Related products
BrushMonster Stump Grinder Price range: $13,200.00 through $14,200.00